DC0065 THERMO FAN KIT 24V 14" ThermO Fan Kit is suitable for both condenser and radiator cooling 24 VOLT Voltage 24V Direction Reversible Blade Diameter 14 inch (350mm) Blade Type Skew Shroud Type Finger Guard

THERMO FAN KIT 24V 14" ThermO Fan Kit is suitable for both condenser and radiator cooling 24 VOLT A ThermO Fan Kit is suitable for both condenser and radiator cooling. ThermO Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow. All ThermO Fan Kits are packaged complete with instructions and mounting hardware for quick and easy installation.

DC0065

BTP PARTS & ACCESSORIES

$230.71

Enter your e-mail address to be notified when product is in stock

Notify Me!

Seller Info

brettstruck1 (38796)

Seller Accepts

Shipping Policy
Orders are generally dispatched the following business day. Standard shipping times are usually 1-3 business days for domestic and 1-5 days for international.

Return Policy
Returns are not accepted

Ask Seller a Question

Report Seller

Description

BRAND NEW
14 inch (35cm) straight 10 blade electric thermo cooling fan configurable for both push & pull applications by simply reversing + / - motor polarity (Optimal air flow achieved in pull mode). Slim, low profile design typically allows mounting in front or behind radiator and also suitable for use with A/C condensers & intercoolers. Blade pitch & design allow this fan to operate best when mounted behind radiator in pull mode.

PLEASE NOTE:
This listing is for fan and mounting kit only.... Package does NOT include additional wiring, connectors, relay, thermostat, screws or installation instructions. Professional installation by a qualified installer is highly recommended for those not mechanically minded, .

Specifications
Voltage	24V
Direction	Reversible
Blade Diameter	14 inch (350mm)
Blade Type	Skew 10
Shroud Type	Finger Guard

THERMO ELECTRIC FAN KIT 24V 14" 350MM 24 VOLT

14 INCH FAN KIT (24 VOLT) PART No: DC0065

14" ThermO Fan - Part No: DC0065

A ThermO Fan Kit is suitable for both condenser and radiator cooling. ThermO Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow .

10 blade design
Slim low profile design
Bi-directional
Includes mounting kit
Configured as push or pull by reversing motor polarity
Lightweight robust construction
Suitable for cooling radiators, intercoolers, A/C condensers

IN KIT
DESCRIPTION
02 MOTOR (24 volt)
03 ROTOR 10 BLADE
04 SHROUD
06 MOUNTING HARDWARE 4 X ADAPATORS

******************************************
CI New Kits

Designed and manufactured to replace the clutch system installed as Original Equipment,
reliable is the term which best describes the CI standard replacement kits.

Each component has been thoroughly tested and developed by
CI for specific field applications within the Australian and New Zealand market place.

This range provides a Quality Assured replacement part that
will meet or exceed the requirements of an original vehicle. And after 60 years of experience in
developing and supplying clutch kits to the automotive aftermarket and OEM customer base,
we are well placed to provide Clutch Kits best suited to your region.

In fact, in many cases we were the Manufacturer of the Original Equipment part.

FOR ALL CAR - UTE - TRACTOR - EXCAVATOR - TRUCK
FILTERS & FILTER KITS TRY
www.brettsfilters.com.au
CLICK PIC BELOW

Reviews (0)

Currently there are no reviews for this product.

Add Review

Questions (4)

does the thermostat sensor have to be conected to the radiator

If you need to ask this question then don't buy the unit.

We have a hounding aerosol bus with ISB 219 HP rear mounted motor,the motor slightly over heats on days of 36 degrees and up hills,the radiator has been cleaned and water pump has been checked,thermostat replaced,we have seen the same radiator setup on a hino bus,it consists of transportation he's to exchange,intercooler radiator then radiator water cooler with pull fan at rear, he you encounter this problem before or do you think a thermo 24 v. fan could help pushing from the trans side to assist the pull fan thanks garry

G-day Garry this is a question for a mechanic or jump on a forum and have a chat there to get some other opinions. In my personal opinion NOT BRETT'S TRUCK PARTS any increased air flow will be helpful Regards JOHN.

hi will this fan fit on 2004 hino fc4j ?

WE WILL SEND YOU A EMAIL IN REGARDS TO THIS QUESTION.

Hello,i would like to know if the fan comes with the motor attached to it.is it a 24v motor and does it fit a toyota dyna vin# XZU411 thanks in advance, Ervin

THE MOTOR COMES WITH IT, IT IS A UNIVERSAL FIT AND IT IS 24V. AS FOR GOING STRIAGHT ON A TOYOTA DYNA, I DOUBT IT, BUT A GENERAL BIT OF MECHANICAL KNOWLEDGE AND WOULD BE ABLE TO FIT CHEERS

Ask Question

See more products from this seller

<< Previous | Next >>

<-- Digital window verification 001 -->